Rig Revival Powder Coat Restoration & Protection Kit

Rig Revival Bundle – Powder Coat Restoration & Protection Kit

Clean, restore and protect your powder-coated 4WD and touring equipment with one complete maintenance system.

The Rig Revival Bundle combines pH-neutral Rig Wash with Rig Revive Powder Coat Protection & Rejuvenation, giving you everything you need to clean contaminated surfaces, restore faded powder coat and provide ongoing protection against the harsh conditions encountered by Australian 4WDs.

From intense UV and coastal salt to red dust, mud and everyday road grime, powder-coated equipment is constantly exposed to the elements. Regular maintenance helps preserve both its appearance and finish.

Whether you're protecting new equipment from day one or bringing tired, weathered powder coat back to life, the Rig Revival Bundle provides a simple two-step solution: clean and prepare with Rig Wash, then restore and protect with Rig Revive.

Complete Powder Coat Care in One Kit

Good powder coat protection starts with proper surface preparation.

Rather than treating a dirty or contaminated surface, the Rig Revival Bundle gives you a complete cleaning and protection system designed to work together.

Step 1 – Clean & Prepare

Use pH-neutral Rig Wash to remove dirt, salt, grease, road grime and environmental contaminants from the powder-coated surface.

Step 2 – Restore & Protect

Follow with Rig Revive to rejuvenate colour and depth in weathered powder coat while laying down a protective finish designed to help defend the surface against UV exposure and environmental weathering.

It's a straightforward maintenance system for serious 4WD and touring equipment.

Restore Faded & Chalky Powder Coat

Australian conditions can be particularly demanding on exterior powder-coated surfaces.

Prolonged exposure to strong UV, heat, coastal salt, pollutants, dirt and off-road conditions can gradually leave powder coat looking dull, faded or chalky.

Rig Revive is a dedicated powder coat restorer and rejuvenator designed to restore colour depth and improve the appearance of weathered powder-coated surfaces while adding ongoing protection.

Instead of simply covering tired powder coat with a temporary greasy shine, Rig Revive uses a water-based, silicone-free formulation designed specifically for powder coat restoration and maintenance.

The result is a richer, cleaner finish that helps bring ageing 4WD accessories and touring equipment back to life.

Protect New Powder Coat Before the Weathering Starts

You don't need to wait for powder coat to fade before looking after it.

The Rig Revival Bundle is equally suited to new 4WD accessories, rooftop tents, bullbars and touring equipment, allowing you to establish a regular maintenance routine before significant weathering develops.

Keeping powder coat clean and periodically applying a dedicated protective treatment can help maintain its appearance and coating integrity over the long term.

For vehicles that live outside, regularly travel off-road or spend time near the coast, preventative maintenance makes particularly good sense.

Ideal for The Bush Company Rooftop Tents

The Rig Revival Bundle is an excellent maintenance solution for the powder-coated aluminium exterior surfaces of The Bush Company rooftop tents.

Regular cleaning helps remove dirt, dust, salt and environmental deposits, while periodic powder coat treatment helps maintain the appearance and condition of the finish.

The Bush Company recommends using a mild pH-neutral wash for general powder coat cleaning and treating powder-coated tent surfaces with a dedicated powder coat restorer such as Rig Revive at least every six months under general-use conditions.

For tents regularly exposed to beach environments, salt or intense UV, more frequent cleaning and treatment may be required.

This makes the Rig Revival Bundle a logical two-stage maintenance system for The Bush Company rooftop tent owner:

Clean with Rig Wash. Restore and protect with Rig Revive.

Important: Rig Wash and Rig Revive are intended for compatible exterior surfaces and should not be applied to rooftop tent canvas or mesh. The Bush Company canvas should be maintained separately according to the manufacturer's dedicated canvas care instructions.

Built for 4WDs, Rooftop Tents & Touring Equipment

The Rig Revival Bundle isn't limited to bullbars.

It's designed for maintaining compatible powder-coated surfaces across your entire touring setup, including:

• Powder-coated aluminium rooftop tent shells and frames
• Bullbars and front protection
• Rear bars
• Scrub rails and side protection
• Roof racks
• Tow bars
• Chassis components
• Powder-coated 4WD accessories
• Canopies and touring equipment
• Camper trailers
• Trailer and caravan drawbars
• Other compatible powder-coated metal surfaces

This makes it particularly useful for heavily accessorised 4WDs where powder coat is used across multiple components.

What's Included

• 1L Rig Wash – pH-Neutral 4WD Wash

Rig Wash is a concentrated pH-neutral 4WD cleaner designed to remove dirt, grease, salt and road grime while remaining gentle on compatible coatings and protective finishes.

It provides the critical preparation stage before applying Rig Revive, helping ensure the powder-coated surface is clean and free from contaminants.

Its pH-neutral formulation also makes Rig Wash ideal for ongoing maintenance between Rig Revive treatments.

• 1L Rig Revive – Powder Coat Restorer & Protectant

Rig Revive is a water-based, silicone-free powder coat rejuvenator designed to restore colour and depth while helping protect powder-coated surfaces against UV exposure, oxidation and environmental weathering.

One litre provides approximately 8–10m² of coverage, equivalent to treating up to approximately six standard bullbars, depending on the surface and application.

That makes the bundle suitable for maintaining multiple accessories or completing repeated treatments across your touring setup.

• Professional-Grade Lint-Free Rig Wipes

Reusable lint-free wipes are included for smooth, controlled application of Rig Revive.

Use them wet or dry, then rinse, allow them to dry and reuse them for future maintenance.

• Product Instructions

Application instructions are included to help you correctly prepare, treat and maintain compatible powder-coated surfaces.

Why Surface Preparation Matters

Applying a powder coat treatment over dirt, grease or contamination can compromise the quality and consistency of the finish.

That's why Rig Wash is an important part of the system rather than simply an additional cleaning product.

Cleaning first removes the contaminants sitting between the powder coat and the protective treatment. Once the surface is clean and completely dry, Rig Revive can then be applied directly to the prepared powder coat.

The combination creates a more complete approach to powder coat restoration and protection than treating an unprepared surface.

Designed for Harsh Australian Conditions

The Rig Revival system has been developed around the conditions experienced by Australian 4WDs and touring equipment.

That includes exposure to:

• Intense UV and heat
• Coastal and beach environments
• Salt and salt air
• Red dust
• Mud and off-road grime
• Road contaminants
• Long-term outdoor storage and exposure

Whether your 4WD spends its life touring remote tracks, camping on the coast or sitting outside between trips, regular cleaning and powder coat maintenance can help preserve the appearance of your equipment.

Ideal for New & Existing 4WD Builds

The Rig Revival Bundle is particularly well suited to:

• New 4WD builds where you want to protect powder coat from the outset
• Powder-coated rooftop tents and touring equipment
• Coastal and beach-going 4WDs regularly exposed to salt
• Off-road vehicles exposed to dust, mud and harsh UV
• Older bullbars and accessories showing signs of fading or chalkiness
• Touring vehicles with multiple powder-coated accessories
• Owners wanting a straightforward ongoing powder coat maintenance system

Whether the objective is powder coat restoration or preventative protection, the same two-step process applies.

Clean. Restore. Protect.

Quality 4WD equipment is an investment, and maintaining the finish is part of looking after that investment.

The Rig Revival Bundle combines the cleaning performance of pH-neutral Rig Wash with the restoration and protective properties of Rig Revive to create a complete 4WD powder coat restoration and protection kit.

Use it to restore faded powder coat, maintain new accessories and establish a regular protection routine across your 4WD, rooftop tent and touring equipment.

pH-neutral cleaning. Water-based powder coat protection. Silicone-free treatment. Developed for Australian conditions.

For The Bush Company rooftop tents and other premium powder-coated touring equipment, it's a simple system:

Clean it. Restore it. Protect it.