Flat Plate Fitment Bracket (4 in Set)

Joins Crossing Extruded Channels Flat · Set of 4 · Stainless Steel


When two extruded channels cross one on top of the other, these flat plates clamp them together with nothing in between to add height. They're ideal for mounting a roof rack such as our Explorer Roof Rack to roof rails, and for the lowest possible rooftop tent installation.


Each 81mm × 81mm plate has four slotted holes for alignment. The set has four plates and 16 stainless steel bolts, washers and nyloc nuts. Not suitable for the AX27, DX27, TX27 or TX27 MAX.

Read MoreRead More
SKU:4RTFFB International Store Finder

Flat Plate Fitment Brackets: low-profile mounting for crossing channels

Where two extruded channels are laid across one another, a Flat Plate clamps them together at the crossing point, with no load bar or raised bracket in between. That keeps the installation as low as possible, which means less wind noise and drag and better clearance in garages and car parks.

Where to use them

  • Roof racks: they're ideal for fixing a roof rack, such as our Explorer Roof Rack, to roof rails.
  • Rooftop tents: for a low installation where the tent's channels cross the rails or bars underneath. They are not suitable for the AX27, DX27, TX27 or TX27 MAX, because the foot rails on those tents are too wide.
  • Where the channels sit perpendicular to each other and you need to fix to the outside edge of the tent's rails, use the Flush Mount Brackets instead.

How many you need

We recommend a minimum of three fixing points on each side of a rooftop tent, so a tent needs two sets. Each plate is 81mm (3.2in) × 81mm (3.2in) with four slotted holes, so you can line the channels up even when the spacing isn't exact.

As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.

Specifications

  • Contents: four plates, 16 stainless steel bolts, washers and nyloc nuts
  • Plate size: 81mm (3.2in) × 81mm (3.2in), four slotted holes
  • Material: 4mm (0.2in) stainless steel, black powder-coat finish
  • Recommended: two sets per rooftop tent (at least three fixing points per side)
  • Not suitable for: AX27, DX27, TX27 and TX27 MAX

Description

Flat Plate Fitment Brackets: low-profile mounting for crossing channels

Where two extruded channels are laid across one another, a Flat Plate clamps them together at the crossing point, with no load bar or raised bracket in between. That keeps the installation as low as possible, which means less wind noise and drag and better clearance in garages and car parks.

Where to use them

  • Roof racks: they're ideal for fixing a roof rack, such as our Explorer Roof Rack, to roof rails.
  • Rooftop tents: for a low installation where the tent's channels cross the rails or bars underneath. They are not suitable for the AX27, DX27, TX27 or TX27 MAX, because the foot rails on those tents are too wide.
  • Where the channels sit perpendicular to each other and you need to fix to the outside edge of the tent's rails, use the Flush Mount Brackets instead.

How many you need

We recommend a minimum of three fixing points on each side of a rooftop tent, so a tent needs two sets. Each plate is 81mm (3.2in) × 81mm (3.2in) with four slotted holes, so you can line the channels up even when the spacing isn't exact.

As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.

Specifications

  • Contents: four plates, 16 stainless steel bolts, washers and nyloc nuts
  • Plate size: 81mm (3.2in) × 81mm (3.2in), four slotted holes
  • Material: 4mm (0.2in) stainless steel, black powder-coat finish
  • Recommended: two sets per rooftop tent (at least three fixing points per side)
  • Not suitable for: AX27, DX27, TX27 and TX27 MAX

FAQS

Does The Bush Company ship internationally?

We serve customers globally, however we don't offer online purchasing on this website. For specific shipping international information, please contact us directly through our Contact Us page.

What is The Bush Company's warranty policy?

We stand behind the quality of our products. Warranty periods vary by product: for example, our awnings carry a 2-year conditional warranty and our awning wall kits 12 months. For full details, see the individual product page or visit our warranty page.

How can I find a store that carries The Bush Company's products?

You can locate authorised retailers using the Find A Store feature on our website.

Didn’t find your answer?

Don't hesitate to contact us

The Bush Chronicles

View all
Single flat plate fitment bracket with four slotted bolt holes
The Bush Company

Flat Plate Fitment Bracket (4 in Set)

$54.00

Flat Plate Fitment Brackets: low-profile mounting for crossing channels

Where two extruded channels are laid across one another, a Flat Plate clamps them together at the crossing point, with no load bar or raised bracket in between. That keeps the installation as low as possible, which means less wind noise and drag and better clearance in garages and car parks.

Where to use them

How many you need

We recommend a minimum of three fixing points on each side of a rooftop tent, so a tent needs two sets. Each plate is 81mm × 81mm with four slotted holes, so you can line the channels up even when the spacing isn't exact.

As with any roof-mounted gear, add up everything carried on top and confirm the total is within the dynamic roof load ratings of your tent, rack and vehicle.

Specifications

Buy online, pick up the same day from our showroom in Marcoola on the Sunshine Coast, or order through one of our stockists Australia wide.

View product

  • 2-Year Warranty

    Adventure confidently.

  • Engineered to Last

    Exclusive B-Tech® Alloy Extrusion Technology

  • Made in South Africa

    Australian Owned, Tested Globally.

  • Online Support Centre

    Expert Help and Advice.