Heavy Duty L Bracket

The Heavy Duty L Bracket is supplied with The Bush Company Awnings for fitment (2 with the 180 XT MAX and 270 XT, and 3 with the 270 XT MAX). If you require additional brackets depending on the fitment and the use of the vehicle/awning, these are sold individually.

For any awning it is important that the bracket can support the weight of the awning in off-road conditions and when in use, especially the larger 270 degree awnings. The Heavy Duty L Bracket Long has been designed to suit The Bush Company awnings when fitted to load bars or a roof rack. The bottom arm which attaches to the load bar or roof-rack is 310mm (12 ¹³/₆₄") long and 81mm (3 ³/₁₆") wide with a range of holes and slot options for attachment, this longer arm is ideal for fitment to roof racks with wider slats where the attachment points are further apart such as a Rhino Pioneer Platform Rack. The vertical arm of the brackets can be configured in three positions enabling the height above the rack to be adjusted from either 225mm (8 ⁵⁵/₆₄"), 165mm (6 ¹/₂") or 105mm (4 ⁹/₆₄").

The bracket is made from stainless steel and has been CNC laser cut and folded and finished in a durable powder coat finish. The brackets have heavy duty gussets in the corner to withstand the rigours of off-road travel. When fitted There must be a bolt securing the bracket in the front hole/slots of the bracket to ensure that the gusset has support, and the gusset of the bracket must be facing upwards and not be installed further out than the edge of the rack. The brackets are supplied with a complete set of stainless steel pan head and hex bolts and nyloc nuts for assembly.