LIGHTWEIGHT AND LOW PROFILE DESIGN

LX27 Gen 1 Ex- Display s/n 96

$3,549.00 WAS $4,224.00

LX27 Lightweight Rooftop Tent – Rugged. Low Profile. Adventure-Ready.


This is the ex-display model from The Bush Company showroom.

 The only slight imperfections with this tent is slight marking in the mounting channels where demonstration accessories were previously mounted such as load bars and awning brackets.

Check out the short video to see this tent in the 'flesh' and the full video review to discover more about the tents features.


The LX27 is The Bush Company’s lightest clamshell rooftop tent, weighing just 73kg with a slim 172mm closed height—perfect for touring rigs and garage clearance. Set up in under 60 seconds with a gas-strut-assisted clamshell design and store bedding inside for fast pack-downs.

Built with a seam-welded aluminium frame and dual-layer 260gsm ripstop canvas, it’s made for harsh conditions. Enjoy full internal height (1.6m), a 60mm tri-density foam mattress, integrated 12V electrics (USB, 12V sockets, LED light), and roof load capacity of 100kg (closed) for solar or gear.

Designed for 4WDs, utes, and campers—engineered to explore.

Read MoreRead More
SKU:4RTLCSRTT sn 96 International Store Finder

LX27 Lightweight Rooftop Tent – Tough. Light. Built for Adventure.

This is the ex-display model from The Bush Company showroom.

 The only slight imperfections with this tent is slight marking in the mounting channels where demonstration accessories were previously mounted such as load bars and awning brackets.

Check out the short video to see this tent in the 'flesh' and the full video review to discover more about the tents features.

There is no warranty on this tent.

Discover the perfect balance of rugged durability, lightweight design, and effortless setup with The Bush Company’s LX27 Lightweight Rooftop Tent. Engineered for 4WD touring, overlanding, and remote camping, the LX27 delivers premium performance without compromise.

Built for Fast Setup. Ready for Long Journeys.

When seconds count, the LX27 delivers. With its gas-strut-assisted clamshell mechanism, you can deploy your rooftop tent in under 60 seconds. Whether you’re setting up at a windy outback stop or packing down on a coastal track, the LX27 keeps you moving.

  • Setup Time: <60 seconds
  • Access: Rear and side entry points
  • Convenience: Store bedding inside with 80mm internal clearance when closed

Featherweight Frame. Full-Sized Comfort.

Weighing just 73kg, the LX27 is the lightest hardshell tent in The Bush Company’s lineup. Its ultra-low 172mm closed height makes it garage-friendly and aerodynamic. Despite its slim build, it opens to a spacious 1.6m internal height — enough room to sit upright and relax after a day on the tracks.

  • Weight: 73kg
  • Closed Height: 172mm
  • Internal Height: 1.6m

Durability Meets Innovation.

Built for the Australian outback, the LX27 features a B-Tech™ extruded aluminium frame and a dual-layer 260gsm acrylic-infused ripstop canvas. This setup resists mould, mildew, UV damage and dust, keeping you protected from the harshest elements.

  • Frame: Seam-welded B-Tech™ aluminium
  • Canvas: South African-made, dual-layer ripstop 260gsm
  • Weatherproofing: Automotive-grade seals and heavy-duty rainfly

Comfort You Can Count On.

Sleep easy with the LX27’s premium mattress — a tri-layer system combining memory foam, high-density foam, and super-high-density foam. Combined with excellent ventilation and internal storage, it offers unmatched liveability for remote touring.

  • Mattress: 60mm tri-density foam (removable cover)
  • Ventilation: Mesh-covered airflow vent, 3 canvas doors/windows
  • Storage: Roof pockets, side pouches, water bottle holders

Integrated Power for Off-Grid Living.

Stay charged in the bush. The LX27 includes an integrated 12V system with dual USB ports, 12V sockets, and a tri-colour rechargeable LED light. Power it via an external Anderson plug and enjoy convenience wherever you roam.

  • Power: Dual 12V + USB outlets
  • Lighting: White/yellow/red LED
  • Plug: 50A Anderson connection

Mount More. Do More.

The LX27’s reinforced roof supports 100kg closed and 35kg when open. Integrated cargo rails and Ezi-Slot channels let you mount solar panels, recovery boards, or load bars for added versatility.

  • Roof Load: 100kg closed / 35kg open
  • Rails: 6 cross-rails with M8 channels + optional extrusions

Specifications

  • External Dimensions: 2.25m (L) x 1.39m (W) x 0.172m (H)
  • Mattress Size: 2.03m (L) x 1.28m (W) x 60mm (H)
  • Weight: 73kg (excl. ladder)
  • Canvas: 260gsm dual-layer polyester ripstop
  • Power Ports: Dual USB, 12V sockets, 50A Anderson plug

Why Choose the LX27?

Whether you’re chasing horizons in the High Country or exploring coastal dunes, the LX27 Lightweight Rooftop Tent delivers durability, comfort, and unmatched ease of use. It’s the lightweight, low-profile solution trusted by serious tourers and everyday explorers alike.

  • Ultra-lightweight at 73kg
  • Store bedding inside while packed
  • 1.6m internal height for full liveability
  • Full electrical integration
  • Suits most vehicles and garages
  • Premium materials made to endure the wild

Australian-designed. Overland-tested. Built for the bush.

Description

LX27 Lightweight Rooftop Tent – Tough. Light. Built for Adventure.

This is the ex-display model from The Bush Company showroom.

 The only slight imperfections with this tent is slight marking in the mounting channels where demonstration accessories were previously mounted such as load bars and awning brackets.

Check out the short video to see this tent in the 'flesh' and the full video review to discover more about the tents features.

There is no warranty on this tent.

Discover the perfect balance of rugged durability, lightweight design, and effortless setup with The Bush Company’s LX27 Lightweight Rooftop Tent. Engineered for 4WD touring, overlanding, and remote camping, the LX27 delivers premium performance without compromise.

Built for Fast Setup. Ready for Long Journeys.

When seconds count, the LX27 delivers. With its gas-strut-assisted clamshell mechanism, you can deploy your rooftop tent in under 60 seconds. Whether you’re setting up at a windy outback stop or packing down on a coastal track, the LX27 keeps you moving.

  • Setup Time: <60 seconds
  • Access: Rear and side entry points
  • Convenience: Store bedding inside with 80mm internal clearance when closed

Featherweight Frame. Full-Sized Comfort.

Weighing just 73kg, the LX27 is the lightest hardshell tent in The Bush Company’s lineup. Its ultra-low 172mm closed height makes it garage-friendly and aerodynamic. Despite its slim build, it opens to a spacious 1.6m internal height — enough room to sit upright and relax after a day on the tracks.

  • Weight: 73kg
  • Closed Height: 172mm
  • Internal Height: 1.6m

Durability Meets Innovation.

Built for the Australian outback, the LX27 features a B-Tech™ extruded aluminium frame and a dual-layer 260gsm acrylic-infused ripstop canvas. This setup resists mould, mildew, UV damage and dust, keeping you protected from the harshest elements.

  • Frame: Seam-welded B-Tech™ aluminium
  • Canvas: South African-made, dual-layer ripstop 260gsm
  • Weatherproofing: Automotive-grade seals and heavy-duty rainfly

Comfort You Can Count On.

Sleep easy with the LX27’s premium mattress — a tri-layer system combining memory foam, high-density foam, and super-high-density foam. Combined with excellent ventilation and internal storage, it offers unmatched liveability for remote touring.

  • Mattress: 60mm tri-density foam (removable cover)
  • Ventilation: Mesh-covered airflow vent, 3 canvas doors/windows
  • Storage: Roof pockets, side pouches, water bottle holders

Integrated Power for Off-Grid Living.

Stay charged in the bush. The LX27 includes an integrated 12V system with dual USB ports, 12V sockets, and a tri-colour rechargeable LED light. Power it via an external Anderson plug and enjoy convenience wherever you roam.

  • Power: Dual 12V + USB outlets
  • Lighting: White/yellow/red LED
  • Plug: 50A Anderson connection

Mount More. Do More.

The LX27’s reinforced roof supports 100kg closed and 35kg when open. Integrated cargo rails and Ezi-Slot channels let you mount solar panels, recovery boards, or load bars for added versatility.

  • Roof Load: 100kg closed / 35kg open
  • Rails: 6 cross-rails with M8 channels + optional extrusions

Specifications

  • External Dimensions: 2.25m (L) x 1.39m (W) x 0.172m (H)
  • Mattress Size: 2.03m (L) x 1.28m (W) x 60mm (H)
  • Weight: 73kg (excl. ladder)
  • Canvas: 260gsm dual-layer polyester ripstop
  • Power Ports: Dual USB, 12V sockets, 50A Anderson plug

Why Choose the LX27?

Whether you’re chasing horizons in the High Country or exploring coastal dunes, the LX27 Lightweight Rooftop Tent delivers durability, comfort, and unmatched ease of use. It’s the lightweight, low-profile solution trusted by serious tourers and everyday explorers alike.

  • Ultra-lightweight at 73kg
  • Store bedding inside while packed
  • 1.6m internal height for full liveability
  • Full electrical integration
  • Suits most vehicles and garages
  • Premium materials made to endure the wild

Australian-designed. Overland-tested. Built for the bush.

Installation

Download a copy of the fitting instructions from our Guides and Fitment Instructions page.

The Bush Company or one of our stockists can assemble and install your rooftop tent.

If you choose to install the rooftop tent yourself please make sure that you have done the due diligence on your intended installation to ensure that it does not create any safety issues. Please ensure that you follow standard safety precautions when undertaking the installation.

If you are installing the rooftop tent yourself, please watch our Pre-Install Assembly video to get some important tips.

Care & Maintenance

Rooftop Tent Care and Maintenance

We recommend that new rooftop tents are opened and the canvas wet down on the outside before first use. Do not spray water onto the air vent above the rear door. This will ensure that your rooftop tent performs flawlessly in wet weather by allowing the poly/cotton core spun thread and canvas to swell ensuring the take up of any potential leaks in the stitching.

Regular Maintenance

  • Lubricate the tent seal with silicon gel and clean seal mating surface thoroughly to prevent the seal from 'sticking' to the tent frame.
  • Check for any signs of wear and tear, such as cracks, tears, or loose stitching in the tent fabric, midge mesh and seals.
  • Inspect zippers, gas struts, hinges for smooth operation and lubrication.

Cleaning Canvas:

  • Do not use soap or detergents on the canvas.
  • Do not store the product if wet, allow drying first.
  • To clean use a soft brush and cold water.
  • Do not expose to petrol, oils or harsh chemicals.

Cleaning Mould From Canvas:

The canvas of The Bush Company Tents is treated during manufacturing with a mould and mildew inhibitor, but in the event that your tent canvas develops mould please follow the steps below to remove it:

  • Allow mould to dry
  • Remove surface mould off with a stiff bristle brush
  • Vacuum the area
  • Treat area with Oil of Clove spray (diluted spray can be purchased or can be mixed using a few drops of oil into a spray bottle of water)

Condensation:

Condensation is a natural occurrence, the combination of cold nights and warm days can create a lovely environment for mould and mildew to develop. This is not because of bad seals but from temperature changes combined with humidity creating condensation inside the tent.

When in use, reduce condensation build-up, keep some of the windows open to increase airflow.

After your trip, make sure you allow the tent to fully dry inside and out. If you are not using your rooftop tent for an extended time (more than 10 days) open the tent regularly to air it out, and possibly remove the mattress and store it separately until your next trip.

Tent Frame Care

To ensure the longevity and aesthetic appeal of your powder coated surfaces, regular care and maintenance are essential. Factors such as pollution, dirt, salt, and exposure to strong ultraviolet (UV) light can gradually impact the quality and integrity of the coating over time.

Cleaning Recommendations:

  • Remove Loose Dirt: Begin by gently removing any loose dirt or deposits from the surface using a wet sponge. This initial step helps prevent scratching during the cleaning process.
  • Use Mild Cleaning Solutions: for general cleaning, utilize a non-abrasive brush or cloth along with a ph-neutral car wash product such as Rig Wash from Revival Offroad to keep the surface of the tent if good condition. These solutions effectively remove dust, salt, and other deposits without causing damage to the powder coating.
  • Rinse Thoroughly: after applying the cleaning solution, rinse the surface thoroughly with clean water. This step ensures the removal of any residue or cleaning agents that may be left behind. 

Powder Coat Treatment

We recommend that at a minimum of once every six months or if your powder coat surface is fading, the powder coat should be treated with a dedicated powder coat restorer such as Rig Revive. Follow the application directions on the product you select.

Recommended Cleaning Frequency:

  • For general use we recommend cleaning and powder coat treatment every six months as a good practice to maintain appearance and coating integrity.
  • If your tent is used regularly for beach camping we recommend cleaning the tent after each trip as you should your vehicle.
  • If your tent is located in an area with high exposure to pollutants or intense UV radiation from being outside all the time, it should be cleaned and the powder coat treated approximately every three months.

 Important Considerations

Avoid Harsh Detergents: Steer clear of detergents that recommend the use of gloves when handling, as they are usually harsh and may be unsuitable for cleaning powder coatings. Instead, opt for a good quality car wash and wax or a similar mild cleaning solution.

Caution with Solvents

While certain solvents are recommended for removing sealants or other building residues, they can potentially harm the extended life of the powder coated surface. To minimise risks, it is best to avoid using solvents unless absolutely necessary. If paint splashes, sealants, or other residues need to be removed, you can safely use methylated spirits, turpentine, or white spirits. However, be cautious as their use may still have long-term effects that may not be immediately visible and could take up to twelve months to appear.

Powder Coat Paint Repair

If the powder coat surface of your tent is damaged and needs to be touched up we recommend the following:

 

Stacked with features

COMPACT, LIGHT AND COMFORTABLE

The LX27 Gen 2 is our low-profile touring tent: just 175mm high when closed and 81kg without the ladder. Inside, 30mm of memory foam sits on a 40mm high-density foam base that resists bottoming out, making for a comfortable night, and standard bedding, sheets and sleeping bags stay stored right inside when you latch it closed. With 1.6m of headroom at the highest point, there's plenty of room to sit up and move around.

ROOM ON TOP, FOR MORE ADVENTURES

The internally reinforced roof is rated to 100kg dynamic when closed, so you can carry solar panels, boards or recovery tracks, and it will still open with 35kg on top. Ezi-Slot channels in the roof and sides take our accessories without drilling. As with any roof-mounted gear, check the total is within your vehicle's and rack's dynamic roof load ratings.

BUILT LIGHT, NOT WEAK

The frame is our B-Tech® Alloy extruded aluminium with seam-welded corners, and light as it is, it will still carry any awning in our range. The body is dual-layer 260gsm acrylic-treated polyester ripstop canvas: the air gap between the layers works like double glazing to insulate and significantly reduce condensation on the inside walls, and the blackout fabric resists the weather and blocks light. A large rainfly with 8mm spring steel poles and adjustable storm straps covers the doors in wet weather.

UP IN 30 SECONDS

Undo the custom-made, heavy-duty stainless steel over-centre latches, let the gas struts lift the clamshell and slot in the spring steel poles to set the rainfly: the LX27 Gen 2 is ready for the night in about 30 seconds. Leave your bedding, sheets and sleeping bags inside when you pack up, and keep the space in your 4WD for everything else.

THE PIONEER’S CHOICE

Built for those who don’t follow the map but write it, the Bush Company’s Rooftop Tents are the gear serious pioneers rely on. Made in South Africa, they’ve earned a reputation as the real deal—proven in the harshest conditions and respected by overlanders worldwide. This is not just a tent; it’s a long-term investment in every adventure you'll ever take.

FAQS

How much does the LX27 Gen 2 Rooftop Tent weigh?

About 81kg (178.6 lb), excluding the ladder and the foot rails, which weigh 3.4kg (7.5 lb) for the pair.

What are the dimensions of the LX27 Gen 2?

Closed, it's 2.25m (7'4.6") long, 1.39m (4'6.7") wide and 175mm (6.9in) high, or 195mm (7.7in) high with the 20mm (0.8in) foot rails fitted. Including the hinges, handles and gas struts, it measures 2.32m (7'7.3") by 1.45m (4'9.1").

Open, at its highest point, it gives 1.6m (5'3") of headroom, or about 1,520mm (4'11.8") above the mattress. The mattress is 2.05m (6'8.7") long, 1.27m (4'2") wide and 70mm (2.8in) thick.

How much can I carry on the roof?

The roof is rated to 100kg (220.5 lb) dynamic when the tent is closed and 35kg (77.2 lb) when it's open, subject to the rating of whatever the tent is mounted to. As with any roof-mounted gear, add up the tent, your rack or canopy and anything on top, and confirm the total is within your vehicle's and rack's dynamic roof load ratings.

Can I leave bedding inside?

Yes. There's 70mm (2.8in) of clearance above the mattress when the tent is closed, so standard bedding, sheets and sleeping bags stay stored right inside. For bulkier bedding such as thick doonas, the AX27 and the TX27 range have more room.

Is there a video of the LX27 Gen 2?

Yes. Our LX27 Gen 2 product video walks through the tent in detail, including its dimensions, canvas, mattress, power and lighting, mounting rails and ladder.

How do I install or mount the LX27 Gen 2?

It comes with six fitment brackets, three for each side, which mount to the side of the foot rails to secure the tent to load bars. The two adjustable foot rails don't need to be fitted for every installation, and we have other mounting options for roof racks and canopies. The Bush Company or one of our stockists can fit it for you. If you're fitting it yourself, follow the rooftop tent fitting instructions and watch our Pre-Install Assembly video first.

Didn’t find your answer?

Don't hesitate to contact us

LX27 Lightweight Rooftop Tent - The Bush Company
The Bush Company

LX27 Gen 1 Ex- Display s/n 96

$3,549.00 WAS $4,224.00

LX27 Lightweight Rooftop Tent – Tough. Light. Built for Adventure.

This is the ex-display model from The Bush Company showroom.

 The only slight imperfections with this tent is slight marking in the mounting channels where demonstration accessories were previously mounted such as load bars and awning brackets.

Check out the short video to see this tent in the 'flesh' and the full video review to discover more about the tents features.

There is no warranty on this tent.

Discover the perfect balance of rugged durability, lightweight design, and effortless setup with The Bush Company’s LX27 Lightweight Rooftop Tent. Engineered for 4WD touring, overlanding, and remote camping, the LX27 delivers premium performance without compromise.


Built for Fast Setup. Ready for Long Journeys.

When seconds count, the LX27 delivers. With its gas-strut-assisted clamshell mechanism, you can deploy your rooftop tent in under 60 seconds. Whether you’re setting up at a windy outback stop or packing down on a coastal track, the LX27 keeps you moving.


Featherweight Frame. Full-Sized Comfort.

Weighing just 73kg, the LX27 is the lightest hardshell tent in The Bush Company’s lineup. Its ultra-low 172mm closed height makes it garage-friendly and aerodynamic. Despite its slim build, it opens to a spacious 1.6m internal height — enough room to sit upright and relax after a day on the tracks.


Durability Meets Innovation.

Built for the Australian outback, the LX27 features a B-Tech™ extruded aluminium frame and a dual-layer 260gsm acrylic-infused ripstop canvas. This setup resists mould, mildew, UV damage and dust, keeping you protected from the harshest elements.


Comfort You Can Count On.

Sleep easy with the LX27’s premium mattress — a tri-layer system combining memory foam, high-density foam, and super-high-density foam. Combined with excellent ventilation and internal storage, it offers unmatched liveability for remote touring.


Integrated Power for Off-Grid Living.

Stay charged in the bush. The LX27 includes an integrated 12V system with dual USB ports, 12V sockets, and a tri-colour rechargeable LED light. Power it via an external Anderson plug and enjoy convenience wherever you roam.


Mount More. Do More.

The LX27’s reinforced roof supports 100kg closed and 35kg when open. Integrated cargo rails and Ezi-Slot channels let you mount solar panels, recovery boards, or load bars for added versatility.


Specifications


Why Choose the LX27?

Whether you’re chasing horizons in the High Country or exploring coastal dunes, the LX27 Lightweight Rooftop Tent delivers durability, comfort, and unmatched ease of use. It’s the lightweight, low-profile solution trusted by serious tourers and everyday explorers alike.

Australian-designed. Overland-tested. Built for the bush.

View product