100W USB-C PD Socket 12–24V

100W USB-C PD Socket 12–24V – Starlink Mini, 4WD & Touring Power

Serious touring gear needs serious power.

The QLEC 100W USB-C PD Socket 12–24V delivers high-output USB charging straight from your vehicle, caravan, camper or off-grid electrical system. With a 100W USB-C Power Delivery port and 36W USB-A output, it gives you the capacity to run or charge high-demand equipment including compatible laptops, drones, tablets, phones and Starlink Mini setups.

Designed as a compact flush-mount 12V USB-C socket, it installs neatly into dashboards, canopies, electrical panels and caravan cabinetry without adding another bulky charger or loose adapter to your setup.

Whether you're building a touring 4WD, fitting out a canopy or setting up a remote work system, this is the sort of power outlet that earns its place.

100W USB-C Power Delivery

This isn't a basic phone charger.

The USB-C port delivers up to 100W through USB Power Delivery, giving you considerably more capability than a conventional low-output USB socket.

That makes it suited to modern equipment with higher power requirements, including compatible:

• Starlink Mini systems
• USB-C laptops
• Tablets and smartphones
• Drone batteries and charging equipment
• Cameras
• GPS and navigation devices
• Portable electronics
• Remote-work equipment

For touring setups where your laptop, communications gear and other USB-C equipment need to stay powered away from mains electricity, 100W USB-C PD gives you a far more capable connection point.

Ready for Starlink Mini

Starlink Mini has changed what remote connectivity looks like for 4WD touring, camping and off-grid travel.

But powering it cleanly from a vehicle requires the right USB-C power source.

This QLEC socket provides a 100W USB-C PD output, making it ideally suited to Starlink Mini installations when paired with an appropriate compatible USB-C PD cable.

For a permanently mounted or portable Starlink Mini setup, that means you can integrate your power supply directly into the 12V or 24V electrical system rather than relying on loose power adapters spread around the vehicle.

It's a clean solution for:

Starlink Mini 4WD setups, caravan Starlink installations, camper systems, remote work vehicles and off-grid satellite internet.

Built for 12V and 24V Systems

The socket accepts 12–24V DC input, making it suitable for a wide range of automotive and touring electrical systems.

That includes common 12V systems found in 4WDs, caravans and campers, as well as compatible 24V installations in larger vehicles and commercial applications.

This versatility makes it an excellent choice for:

4WDs, utes, trucks, caravans, camper trailers, motorhomes, boats, work vehicles and custom off-grid electrical systems.

If you're building a permanent power panel, the ability to run from either 12V or 24V gives you more flexibility when the vehicle or electrical system changes.

36W USB-A Output

Not everything in your touring kit runs USB-C.

Alongside the 100W USB-C PD port, the socket includes a 36W USB-A output, giving you a second connection for compatible devices using conventional USB-A cables.

That means one compact outlet can handle both newer USB-C equipment and the large number of accessories still using USB-A.

Charge your phone while powering your laptop.

Run a USB-C device while keeping your GPS or camera battery topped up.

One socket. Two useful connections.

Built for High-Demand Touring Electronics

Modern 4WD electrical systems are doing far more than they were a few years ago.

Phones, cameras, tablets, drones, laptops and satellite internet are now part of the touring loadout.

A conventional low-power USB outlet can quickly become the weak point.

With up to 100W USB-C PD output, this socket gives your power system the capacity to support equipment that previously required larger dedicated chargers or mains-powered adapters.

For photographers, drone operators, remote workers and long-distance travellers, that means less time juggling chargers and more time keeping critical equipment powered.

Clean Flush-Mount Installation

A proper touring build should look like it was designed that way from the start.

The QLEC 100W USB-C socket uses a flush-mount design, allowing it to sit neatly in a dashboard, canopy panel, drawer system or cabinet.

Installation requires a 29mm mounting hole, creating a compact finished appearance without a large external housing.

This makes it particularly well suited to:

4WD canopies, drawer systems, electrical control panels, caravans, camper trailers, motorhomes, boat dashboards and custom vehicle fit-outs.

Once installed, you've got high-output USB power exactly where you need it without another loose charger hanging from the dash.

Compact 63mm Mounting Depth

High power doesn't need to take over your electrical cabinet.

The socket requires approximately 63mm of clearance behind the mounting face, allowing it to be integrated into many dashboards, cabinetry panels and electrical enclosures.

Before installation, simply check that sufficient rear clearance is available for the socket body, wiring and connections.

That compact footprint makes it easier to add serious charging capacity to an existing 12V setup without rebuilding the entire panel.

Rubber Protection Cap

Touring vehicles live around dust.

Campers deal with dirt.

Boats deal with spray.

The socket includes a rubber protection cap to cover the charging ports when they're not in use.

That added protection is particularly useful when the socket is installed in a canopy, camper or other location where exposed electrical accessories can encounter dust and everyday touring conditions.

Keep the ports covered when you're not using them and they're better protected from the environment around them.

Ideal for 4WD Canopy Installations

A 4WD canopy has become the power hub of the modern touring rig.

Fridges, battery systems, inverters, solar controllers and accessory outlets all live in the back — so it makes sense to put your high-output USB charging there as well.

The QLEC 100W USB-C 12V socket can be installed directly into a suitable canopy panel or electrical board, giving you a dedicated high-output charging point next to the rest of your touring equipment.

It's particularly useful for charging:

laptops, drone batteries, cameras, tablets and other high-demand electronics while the vehicle is at camp.

For permanent Starlink Mini installations, it can also become part of a clean integrated power system alongside your roof mount and cable management.

Built for 4WD, Caravan and Camper Power Systems

4WDs, caravans and campers already run most of their equipment from 12V battery systems.

Adding a high-output USB-C socket gives that electrical system another level of capability.

Instead of carrying separate 240V laptop chargers and USB adapters, compatible equipment can be powered directly from the installed socket.

That makes it particularly useful beside:

workstations, beds, kitchen areas, electrical panels and entertainment systems.

For off-grid travellers working from a caravan or camper, a 100W USB-C PD outlet is one of those upgrades that quickly becomes part of the everyday setup.

Power Laptops Without the Bulk

USB-C Power Delivery has made it possible to run many modern laptops directly from compact DC charging outlets.

With up to 100W USB-C PD output, this socket provides enough capacity for many compatible USB-C laptops without requiring a separate AC charger.

That's a major advantage in remote-work and touring setups.

Less gear.

Fewer mains adapters.

No loose charger sitting in the footwell.

Plug into the vehicle's integrated USB-C outlet and keep working.

Always confirm your laptop's USB-C PD voltage and wattage requirements before connection.

Charge Drones and Camera Gear Off-Grid

Anyone travelling with camera or drone equipment knows how quickly batteries disappear.

The QLEC socket gives you a fixed high-output USB-C charging point that can be powered from your vehicle or house battery system.

That makes it an excellent addition for:

touring photographers, videographers, drone operators, field crews and anyone documenting remote trips.

Charge while driving or from your off-grid battery system at camp rather than waiting until you're back near mains power.

A Smarter Way to Power Starlink Mini

For a vehicle-mounted Starlink Mini, the mounting bracket is only half the installation.

You also need power.

A dedicated 100W USB-C PD socket allows the Starlink Mini power connection to become part of the vehicle's electrical system rather than relying on another portable adapter.

When used with an appropriate Starlink Mini USB-C power cable, the socket can form part of a clean installation incorporating:

your Starlink Mini mount, power system, cable routing and roof rack cable management.

The result is a setup that looks and works like part of the vehicle.

Designed for Permanent Touring Builds

A cigarette lighter adapter has its place, but a permanent vehicle build deserves something more integrated.

Flush mounting the QLEC socket creates a dedicated high-output connection that remains in place and ready to use.

No adapter sticking out from the dashboard.

No charger rolling around the centre console.

No hunting through a storage box when your laptop battery hits 10%.

Just plug in and get power.

For a carefully built 4WD, caravan or camper, that's the cleaner way to do it.

Key Features

• 100W USB-C Power Delivery output
• 36W USB-A output
• Suitable for 12–24V DC electrical systems
• Ideal for compatible Starlink Mini installations
• Suitable for compatible USB-C laptops
• High-output charging for tablets, phones and electronics
• Ideal for drone and camera equipment
• Dual USB-C and USB-A charging capability
• Compact flush-mount design
• 29mm mounting hole
• Approximately 63mm mounting depth behind the face
• Rubber protection cap
• Suitable for 4WDs, utes and canopy systems
• Ideal for caravans and camper trailers
• Suitable for motorhomes, trucks and custom electrical systems
• Designed for permanent vehicle and off-grid installations
• QLEC product code 87-2749-UPD100
• Installation Considerations

This is a high-output electrical accessory, so the supply wiring needs to match the job.

Before installation, confirm that the vehicle or auxiliary electrical system is suitable for the socket's required load.

The socket requires a 29mm mounting hole and approximately 63mm of clearance behind the mounting face.

Install it in a location that provides sufficient rear clearance for the socket body and wiring while keeping connections protected from movement, sharp edges and excessive heat.

The supplying circuit should use correctly sized wiring and appropriate fuse protection for the installation.

If you're unsure about the electrical requirements, have the socket installed by a qualified automotive or low-voltage electrical technician.

Important Starlink Mini Compatibility

Starlink specifies that powering Starlink Mini over USB requires a 100W USB Power Delivery source capable of 20V/5A, together with an appropriate Starlink Mini USB-C power cable.

The QLEC socket is rated for up to 100W USB-C PD and is marketed for Starlink Mini applications.

For any Starlink Mini installation, confirm that the socket, cable and complete electrical system support the required USB Power Delivery profile before use.

Your vehicle wiring also needs to maintain sufficient input voltage and current under load.