Starlink ARB Base Rack Mount/Cable Clamp Kit

ARB BASE Rack Mount/Cable Clamp Kit

Keep your roof rack setup clean, secure and properly integrated with the Gorilla Mounts ARB BASE Rack Mount/Cable Clamp Kit.

Designed specifically for the ARB BASE Rack dovetail system, this compact mounting accessory gives you a direct mounting point for compatible equipment while also providing a practical way to secure and route power cables across your roof rack.

No drilling. No permanent modification to the rack. Just a purpose-designed fit that uses the existing ARB BASE Rack dovetail channel.

Ideal for Starlink Mini installations, 4WD electrical accessories, roof rack wiring and touring setups, the kit helps keep cables controlled and equipment securely mounted without relying on improvised brackets or loose cable ties.

Purpose-Built for the ARB BASE Rack

The ARB BASE Rack uses a distinctive dovetail mounting system around its extrusions, allowing accessories to attach directly to the rack.

The Gorilla Mounts ARB BASE Rack Mount/Cable Clamp Kit has been designed specifically around that system.

Its moulded mounting section locates directly into the BASE Rack dovetail channel, creating a neat installation without drilling additional holes or modifying the rack.

For 4WD touring vehicles where roof space is already occupied by awnings, rooftop tents, lighting, recovery equipment and communications gear, that direct-fit design makes it easier to integrate additional equipment while keeping the installation compact.

Mount and Manage Cables with One System

This isn't just an ARB BASE Rack mounting bracket.

The design incorporates additional components that allow the same system to function as a roof rack cable clamp, giving you a straightforward way to route and secure electrical cables along the rack.

This is particularly useful for installations involving:

• Starlink Mini power cables
• Satellite internet equipment
• Roof rack lighting
• 12V accessories
• Solar wiring
• Antenna and communications equipment
• Touring and camping electronics
• Other rooftop accessory wiring

Keeping cables properly located helps create a cleaner installation and reduces the amount of loose wiring running across your roof rack.

For a Starlink Mini roof rack setup, the clamp can be used to manage the power cable between the mounted Starlink Mini and the vehicle's electrical system.

No-Drill ARB BASE Rack Installation

A good roof rack accessory shouldn't require unnecessary modifications to the rack it was designed to fit.

The ARB BASE Rack Mount/Cable Clamp Kit installs into the rack's existing dovetail system, allowing it to be fitted without drilling or permanently modifying the rack.

That makes installation simpler while retaining the versatility of the BASE Rack system.

It also means the mount can be repositioned when your roof rack layout changes, giving you greater flexibility as accessories are added or relocated.

Heavy-Duty Injection-Moulded Nylon Construction

The mount is manufactured from heavy-duty injection-moulded nylon, providing a strong yet lightweight solution for exterior vehicle applications.

Injection moulding allows the component to be manufactured as a consistent, purpose-designed shape rather than relying on a generic bracket adapted to suit the rack.

The nylon construction is well suited to touring environments where roof rack accessories are exposed to weather, dust, vibration and regular use.

The result is a compact 4WD roof rack mounting accessory without the unnecessary weight or bulk of a large metal bracket.

Stainless Steel Mounting Hardware Included

Each ARB BASE Rack Mount/Cable Clamp Kit includes:

• Stainless steel M8 nyloc nuts
• Stainless steel button-head bolts
• Injection-moulded mounting and clamp components

The supplied stainless hardware provides strong fastening with corrosion resistance suited to exterior installations.

Nyloc nuts also provide additional resistance to loosening caused by normal vehicle movement and vibration when correctly installed.

Ideal for Starlink Mini Cable Management

Starlink Mini has made compact satellite internet increasingly practical for touring vehicles, caravans and remote-area setups, but a permanent installation still requires careful cable routing.

The ARB BASE Rack Mount/Cable Clamp Kit provides a clean way to integrate Starlink Mini cable management into an existing ARB BASE Rack.

When used as part of a Starlink Mini roof rack installation, the clamp helps keep the power cable positioned against the rack rather than leaving excess cable unsecured across the roof.

It can also be combined with a compatible Starlink Mini mounting system to create a more integrated touring setup.

A Cleaner 4WD Roof Rack Setup

A roof rack quickly becomes crowded once lighting, awnings, satellite communications, solar systems and touring accessories are added.

Poorly routed wiring can leave an otherwise well-built setup looking unfinished and make future maintenance more difficult.

Using dedicated roof rack cable management clamps gives cables a defined path around the rack and allows the installation to remain organised as additional accessories are fitted.

The low-profile design of the Gorilla Mounts kit keeps the mounting hardware close to the BASE Rack rather than adding unnecessary brackets above or around the platform.

Built for Touring and Off-Road Installations

The ARB BASE Rack Mount/Cable Clamp Kit is suitable for a wide range of vehicle and touring applications, including:

• 4WD touring vehicles
• Overland builds
• Utes and dual-cab setups
• Remote-area vehicles
• Work and fleet vehicles
• Starlink Mini installations
• Roof rack electrical systems
• Camping and touring accessories
• Rooftop lighting and communications systems

Its direct-fit design makes it especially useful where maintaining a clean, modular roof rack installation is important.

Four Colour Options

The kit is available in:

• Black
• White
  
• Grey

This allows the clamp to be matched more closely with your vehicle, roof rack, Starlink Mini mount or other touring accessories.

Key Features

• Designed specifically for the ARB BASE Rack dovetail system
• Functions as both a mounting point and roof rack cable clamp
• No drilling or permanent rack modification required
• Heavy-duty injection-moulded nylon construction
• Low-profile design
• Suitable for Starlink Mini power cable management
• Suitable for other rooftop electrical wiring
• Stainless steel M8 mounting hardware included
• M8 nyloc nuts help resist loosening under vibration
• Suitable for 4WD, touring and off-road vehicle installations
• Available in Black, White, Desert Tan and Grey

Designed to Work with Your Existing BASE Rack

One of the key advantages of the ARB BASE Rack system is its integrated dovetail accessory mounting arrangement.

Rather than adding another universal clamp or fabricating a separate bracket, the Gorilla Mounts kit uses the rack's existing mounting architecture.

That means fewer unnecessary components, no drilling and a cleaner installation.

Whether you're building a Starlink Mini 4WD setup, routing cables for rooftop lighting or simply looking for a better way to organise wiring across your rack, the ARB BASE Rack Mount/Cable Clamp Kit provides a compact, purpose-designed solution.

Installation

Position the mount at the required location on the ARB BASE Rack dovetail channel and install using the supplied hardware.

When using the system as a cable clamp, route the appropriate cable through the clamp and check that it is securely retained without excessive compression or strain.

After installation, confirm all fasteners are correctly tightened and periodically inspect the mount, cables and mounting hardware as part of normal vehicle and roof rack maintenance.

Always ensure electrical wiring is installed and routed appropriately for the vehicle, accessory and operating environment.

We aim to offer our customer's the most competitive rates for shipping based on the items ordered. Shipping rates at checkout are calculated automatically based on items order and shipping address. All shipping rates automatically include in-transit insurance from the time of collection to delivery.

Freight Partners Used

Australia Post- orders not including items over 1.05m and/or 20Kg in Australia and overseas.

FEDEX - courier delivery to home, business or depot within Australia & Overseas

DHL Express- courier delivery for international order with items over 1.05m or 20Kg

Home Delivery

If you provide a residential address for delivery of your order it is assumed that your items can left in a safe place at your home if nobody ia available to receive them in person, in which case, The Bush Company is not accountable for any loss once delivery is made.

Pickup In-Store

To save on shipping costs you can select "Pickup In-Store" during checkout.

All items are available for collection from our store at The Bush Company,14 Cessna Street, Marcoola, QLD 4564.  Please note that due to insurance and health and safety issues, you cannot self-fit your purchase on our premises.

The Caprax Canopies by Rhinoman are also available for pickup from our warehouses in Melbourne and Perth, just select "Pickup In-Store" during checkout and we will contact you to confirm collection date and time.

International Delivery

Freight costs for international orders are calculated excluding customs duties and local sales taxes.  The receiver will be required to cover the costs of local import duties and sales taxes. International delivery is available through our website fro all items excluding rooftop tents, awnings and ute canopies.  To obtain a freight quote for the delivery of these items overseas please contact please contact us by email at  info@thebushcompany.com.au or by phone +61 (07) 5302 6948.

Large Items (Courier Delivery Tents & Canopies)

Home Delivery

’Home Delivery ’ means a home or private residence, including locations where a business is operated from the home or private residence. For home delivery of rooftop tents and canopies a forklift must be available at the delivery point and truck access. We will contact you to confirm that his is the case.  Unloading by hand is not permitted by the couriers due to health and safety regulations. If, as is usually the case, you do not have a forklift available at your home address, we can arrange for your tent or canopy to be delivered to the nearest FEDEX freight depot/agent for collection from there.

Business Delivery

If you provide a commercial premises address for the delivery of your rooftop tent or canopy,  a forklift must be available at the delivery point and truck access. Unloading by hand is not permitted by the couriers due to health and safety regulations.

Depot Collection

If you want to have you items delivery to a depot for you to collect (often the cheapest option for tents and canopies) but you are unsure of the nearest depot please contact us by email at info@thebushcompany.com.au or by phone +61 (07) 5302 6948 to obtain a shipping quote and place your order.

If you have any questions regarding shipping,  please contact us by email at info@thebushcompany.com.au or by phone +61 (07) 5302 6948.

Damage In Transit

If you or the person responsible for receiving your order does not check that the item has arrived in good condition prior to accepting it, The Bush Company cannot be held responsible for any claim for damage in transit.

When your order shipment arrives, it is essential that you check it thoroughly for any signs of damage before signing to accept the shipment.  This means checking the exterior box and if there are any signs of damage externally then the box should be opened, and the product examined for any signs of damage to the product itself.  This needs to be done before you sign anything to say that the item has been received, the driver needs to wait until you are satisfied.  If you are not satisfied with the condition of the item, then you are entitled to refuse delivery and the courier will have to return the product to us.

If you do not follow this procedure and it turns out that the item has been damaged in transit, then there is no way for The Bush Company to claim on the freight insurance to cover any damage.  If you sign anything and are not satisfied you must ensure that this is noted by the driver in writing and obtain a copy that is signed by the driver.

Merchandise Shipping

Our merchandise range (T-shirts, Hoodies, Hats, Mugs etc.) are print on demand products and have different shipping policies associated with them.  Please view the 'Delivery & Returns' tab on each product for more information.