Starlink Mount Stainless Steel CNC Plates

Stainless Steel CNC Plates – Heavy-Duty Marine Grade Mounting Plates

When your mounting setup is exposed to salt, spray, weather and hard use, the hardware behind it matters.

The Gorilla Mounts Stainless Steel CNC Plates are precision-cut from 3 mm marine-grade stainless steel to provide a strong, corrosion-resistant mounting solution for 4WDs, boats, beach vehicles, roof rack systems and touring setups.

Each 85 mm stainless steel mounting plate is supplied with an M8 stainless steel bolt and M8 nyloc nut, creating a complete mounting point designed for applications where conventional hardware may be exposed to demanding outdoor and coastal conditions.

Whether you're building a Starlink Mini mounting system, roof rack accessory setup, marine installation or custom 4WD mounting solution, these CNC-cut stainless steel plates provide a simple, durable foundation.

3 mm Marine-Grade Stainless Steel Construction

Built from 3 mm marine-grade stainless steel, these mounting plates are designed for environments where moisture and corrosion resistance are important.

That makes them particularly well suited to:

• Coastal 4WDs
• Beach touring vehicles
• Boats and marine applications
• Caravans and campers
• Roof rack installations
• Starlink Mini mounting systems
• Custom touring accessories
• Outdoor equipment installations

For vehicles regularly exposed to salt air, ocean spray, mud and changing weather conditions, stainless steel provides a practical alternative to mounting hardware that requires additional coatings or surface finishes for corrosion protection.

Built for Coastal and Marine Environments

Salt and moisture are hard on vehicle hardware.

The Stainless Steel CNC Plates are designed specifically for demanding environments where corrosion resistance matters, making them a logical choice for vehicles and equipment regularly used around the coast.

If your 4WD spends weekends on the beach, your boat lives around saltwater, or your touring setup is continually exposed to the weather, using marine-grade stainless steel mounting hardware helps build corrosion resistance into the installation from the start.

They're equally suitable for inland touring where durability and low-maintenance mounting hardware are priorities.

Precision CNC-Cut Construction

Every plate is precision CNC cut, producing a consistent 85 mm mounting component designed for repeatable installation.

Precision manufacturing matters when mounting accessories to a vehicle, roof rack or other equipment. Consistent sizing and accurate machining make it easier to create a clean installation without relying on improvised plates or hand-fabricated hardware.

The result is a straightforward CNC stainless steel mounting plate that can form part of a professional-looking touring or accessory installation.

85 mm Heavy-Duty Mounting Plate

At 85 mm in size, each stainless steel plate provides a substantial mounting footprint while remaining compact enough for vehicle and equipment installations where space is limited.

That makes the plates suitable for a variety of custom mounting applications without adding unnecessary bulk to the setup.

Their combination of an 85 mm profile and 3 mm stainless steel construction makes them particularly useful where a compact but robust 4WD accessory mounting plate is required.

Stainless Steel M8 Hardware Included

Each plate is supplied with:

• 1 x 3 mm marine-grade stainless steel CNC plate
• 1 x M8 stainless steel bolt
• 1 x M8 stainless steel nyloc nut

Using stainless steel hardware throughout the mounting point helps maintain corrosion resistance rather than pairing a stainless plate with conventional fasteners that may deteriorate more quickly in coastal conditions.

The supplied M8 nyloc nut also helps resist loosening caused by normal vehicle movement and vibration when the hardware is correctly installed and tightened.

Ideal for Starlink Mini Mounting Systems

The Stainless Steel CNC Plates can be used as part of a Starlink Mini mounting setup, providing stainless mounting hardware for installations exposed to the elements.

For 4WDs, caravans, campers and touring vehicles running permanent or semi-permanent Starlink Mini installations, selecting corrosion-resistant hardware is particularly important because rooftop equipment is continually exposed to rain, dust, UV, road grime and, in coastal areas, salt.

Used with an appropriate Starlink Mini mounting system, these plates can form part of a clean and durable rooftop installation.

Built for 4WD and Touring Applications

Touring equipment needs to handle more than a trip to the shops.

Corrugated roads, vibration, dust, mud, rain and coastal conditions all place additional demands on vehicle-mounted accessories and their hardware.

The Gorilla Mounts Stainless Steel CNC Plates are suited to applications including:

• 4WD roof rack accessories
• Touring vehicle installations
• Starlink Mini mounts
• Ute and canopy setups
• Caravan and camper accessories
• Marine equipment
• Boat mounting applications
• Beach vehicle setups
• Custom equipment mounts
• Outdoor electrical and communications equipment

Their simple format also makes them useful for custom builds where a strong stainless steel mounting plate is required without introducing a large fabricated bracket.

A Practical Upgrade for Roof Rack Mounting

Roof-mounted accessories are permanently exposed to the elements.

For equipment installed on a 4WD roof rack, canopy or touring platform, choosing suitable mounting materials is an important part of building a reliable setup.

These stainless steel roof rack mounting plates provide a compact option for mounting compatible accessories while maintaining corrosion resistance in exposed locations.

They can be particularly useful for vehicles carrying satellite communications equipment, electrical accessories and other touring gear that remains fitted between trips.

Clean, Purpose-Built Mounting Hardware

Custom vehicle builds often end up relying on oversized washers, improvised backing plates or fabricated pieces of steel simply because suitable mounting hardware isn't available.

The Gorilla Mounts Stainless Steel CNC Plates provide a purpose-made alternative.

Their round 85 mm design, CNC-cut construction and matching M8 stainless hardware create a neat mounting solution that can be incorporated into both new installations and upgrades to existing touring setups.

For builders who pay attention to the small details, that means the hardware underneath the accessory can be finished to the same standard as the equipment above it.

Key Features

• Precision CNC-cut stainless steel mounting plates
• 3 mm marine-grade stainless steel construction
• 85 mm plate size
• Designed for saltwater and harsh outdoor environments
• Corrosion-resistant stainless steel construction
• M8 stainless steel bolt included with each plate
• M8 stainless steel nyloc nut included with each plate
• Suitable for 4WD and touring applications
• Suitable for boats and marine installations
• Ideal for coastal and beach vehicles
• Suitable for Starlink Mini mounting setups
• Suitable for roof rack and custom accessory installations

Designed for Harsh Outdoor Conditions

A mounting plate may be a small part of a touring build, but it's one of the components responsible for keeping the equipment attached to the vehicle.

Using the right material becomes even more important when the installation is continuously exposed to weather or saltwater.

Marine-grade stainless steel provides the combination of strength and corrosion resistance required for these environments without depending on an external coating for its primary corrosion protection.

That's why these CNC plates are particularly suited to marine, coastal, 4WD and off-road mounting applications.

Installation

Before installation, confirm that the mounting surface, accessory and surrounding structure are suitable for the intended load and application.

Position the stainless steel CNC plate as required and secure it using the supplied M8 stainless steel bolt and nyloc nut.

Ensure the fastener is correctly tightened and that the plate is seated securely against the mounting surface.

For vehicle, roof rack and marine installations, periodically inspect the plate, fastener and surrounding structure as part of normal equipment maintenance, particularly after extended off-road travel or exposure to harsh coastal conditions.

Where holes are drilled through vehicle roofs, canopies or other weather-exposed surfaces, use an appropriate sealing method to prevent water ingress.

We aim to offer our customer's the most competitive rates for shipping based on the items ordered. Shipping rates at checkout are calculated automatically based on items order and shipping address. All shipping rates automatically include in-transit insurance from the time of collection to delivery.

Freight Partners Used

Australia Post- orders not including items over 1.05m and/or 20Kg in Australia and overseas.

FEDEX - courier delivery to home, business or depot within Australia & Overseas

DHL Express- courier delivery for international order with items over 1.05m or 20Kg

Home Delivery

If you provide a residential address for delivery of your order it is assumed that your items can left in a safe place at your home if nobody ia available to receive them in person, in which case, The Bush Company is not accountable for any loss once delivery is made.

Pickup In-Store

To save on shipping costs you can select "Pickup In-Store" during checkout.

All items are available for collection from our store at The Bush Company,14 Cessna Street, Marcoola, QLD 4564.  Please note that due to insurance and health and safety issues, you cannot self-fit your purchase on our premises.

The Caprax Canopies by Rhinoman are also available for pickup from our warehouses in Melbourne and Perth, just select "Pickup In-Store" during checkout and we will contact you to confirm collection date and time.

International Delivery

Freight costs for international orders are calculated excluding customs duties and local sales taxes.  The receiver will be required to cover the costs of local import duties and sales taxes. International delivery is available through our website fro all items excluding rooftop tents, awnings and ute canopies.  To obtain a freight quote for the delivery of these items overseas please contact please contact us by email at  info@thebushcompany.com.au or by phone +61 (07) 5302 6948.

Large Items (Courier Delivery Tents & Canopies)

Home Delivery

’Home Delivery ’ means a home or private residence, including locations where a business is operated from the home or private residence. For home delivery of rooftop tents and canopies a forklift must be available at the delivery point and truck access. We will contact you to confirm that his is the case.  Unloading by hand is not permitted by the couriers due to health and safety regulations. If, as is usually the case, you do not have a forklift available at your home address, we can arrange for your tent or canopy to be delivered to the nearest FEDEX freight depot/agent for collection from there.

Business Delivery

If you provide a commercial premises address for the delivery of your rooftop tent or canopy,  a forklift must be available at the delivery point and truck access. Unloading by hand is not permitted by the couriers due to health and safety regulations.

Depot Collection

If you want to have you items delivery to a depot for you to collect (often the cheapest option for tents and canopies) but you are unsure of the nearest depot please contact us by email at info@thebushcompany.com.au or by phone +61 (07) 5302 6948 to obtain a shipping quote and place your order.

If you have any questions regarding shipping,  please contact us by email at info@thebushcompany.com.au or by phone +61 (07) 5302 6948.

Damage In Transit

If you or the person responsible for receiving your order does not check that the item has arrived in good condition prior to accepting it, The Bush Company cannot be held responsible for any claim for damage in transit.

When your order shipment arrives, it is essential that you check it thoroughly for any signs of damage before signing to accept the shipment.  This means checking the exterior box and if there are any signs of damage externally then the box should be opened, and the product examined for any signs of damage to the product itself.  This needs to be done before you sign anything to say that the item has been received, the driver needs to wait until you are satisfied.  If you are not satisfied with the condition of the item, then you are entitled to refuse delivery and the courier will have to return the product to us.

If you do not follow this procedure and it turns out that the item has been damaged in transit, then there is no way for The Bush Company to claim on the freight insurance to cover any damage.  If you sign anything and are not satisfied you must ensure that this is noted by the driver in writing and obtain a copy that is signed by the driver.

Merchandise Shipping

Our merchandise range (T-shirts, Hoodies, Hats, Mugs etc.) are print on demand products and have different shipping policies associated with them.  Please view the 'Delivery & Returns' tab on each product for more information.